Streacom debuts Fanless SG10 case and your PC won’t catch fire
With no fan noise, you can listen to that coil whine even more easily
Share this article...
WePC is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Prices subject to change. Learn more
As the thermal design of new graphics cards keeps increasing, you’d expect to need more and more cooling included in your PC case. But Streacom shows off the SG10 Fanless Gaming Case at Computex 2023.
In collaboration with Calyos, it is aimed at cooling high-performance CPUs and GPUs in a fully passive mode. Serving as a proof of concept for applying loop heat pipe tech in the consumer PC market and an alternative to liquid cooling. A system designed for spaceships by the USSR, it opts for two-phase heat transfer by capillary action to remove heat and passively move it to a radiator or condenser.
Black Friday is back, and with it comes huge savings on some of the market’s most popular gaming and tech products. We’ll be covering all the best deals in more details over in our deals hub, but if you haven’t got time to read through those, why not see our top picks below.
-
ASUS TUF NVIDIA RTX 5080
Was $1599
Now $1199
-
ASUS TUF RTX 5070 Ti
Was $999
Now $849
-
Samsung Odyssey OLED G6
Was $899
Now $649
-
TCL 43S250R Roku TV 2023
Was $279
Now $199
-
iBUYPOWER Y40 Gaming PC
Was $2,299
Now $1,819
-
Samsung Odyssey G9 (G95C)
Was $1,299
Now $777
-
Alienware Area-51 gaming laptop
Was $3,499
Now $2,799
-
Samsung 77-inch OLED S95F
Was $4,297
Now $3,497
-
ASUS ROG Strix G16
Was $1,499
Now $1,199
*Prices and savings subject to change. Click through to get the current prices.
This eliminates and worry of a pump failure or leak that might plague an AIO. This design is a resurgence of a Kickstarter that Calyos couldn’t execute and Streamcom aims to finish it with a redesign of the NSGO. It utilizes a new evaporator design that pumps the coolant around the system and a condenser that improves heat emission.
With a milled aluminum chassis and structural steel, it is a heavier design with its cooling. But also considers functionality with adjustable diagonally mounted components. Along with movable front and back I/O ports. It sure is unique and suggests it can support a GPU up to 280mm in length and a TBP of 350W without fans. With support for ATX and CPU cooling of 250W fanless. These are preliminary so may change by the final release of the case.
| Size | 608 x 268 x 520mm |
| Weight | 15kg/33lbs |
| Materials | Al/Steel |
| Motherboard | ATX |
| GPU | Up to 280mm |
| PSU | ATX (no depth limit) |
| Drives | 5 x 3.5″/2.5″ (minimum) |
| CPU cooling | 250W fanless |
| GPU cooling | 350W fanless |
| CPU compatibility | Current AMD/Intel |
| GPU compatibility | RX 6000/7000, RTX30/40 series |
| Cooling technology | Dual LHP |
| Front IO | 1x USB-C, 2x USB-A |
| Rear IO (optional) | USB A/C, HDMI, RJ45 |
